public class SwitchingCapabilitySpecificInformationTDM
extends SwitchingCapabilitySpecificInformation
Switching Capability SpecificInformation for TDM.
Kompella & Rekhter Standards Track [Page 4]
RFC 4203 OSPF Extensions in MPLS October 2005
When the Switching Capability field is TDM, the Switching Capability
specific information field includes Minimum LSP Bandwidth, an
indication whether the interface supports Standard or Arbitrary
SONET/SDH, and padding.
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Minimum LSP Bandwidth |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Indication | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The Minimum LSP Bandwidth is encoded in a 4 octets field in the IEEE
floating point format. The units are bytes (not bits!) per second.
The indication whether the interface supports Standard or Arbitrary
SONET/SDH is encoded as 1 octet. The value of this octet is 0 if the
interface supports Standard SONET/SDH, and 1 if the interface
supports Arbitrary SONET/SDH. The padding is 3 octets, and is used
to make the Interface Switching Capability Descriptor sub-TLV 32-bits
aligned. It SHOULD be set to zero by the sender and SHOULD be
ignored by the receiver.